61
6. Click the [
Levels
] tab.
If the microphone input is muted, click the icon “ ” on
the right side of the slider to cancel mute “ ”.
7. Press the
PTT
switch of the transceiver connected to the
PC and adjust the microphone level while talking with a
normal voice level.
Make the waveform as large as possible while the wave-
form displayed on the waveform monitor does not exceed
the dotted line or the peak of the waveform does not col-
lapse.
8.
【
This setting is necessary only when using the FT5D,
FT3D or FT2D transceiver
】
Click the [
Listen
] tab and check “
Listen to this device
”.
Depending on your computer, there may be no [
Listen
]
tab. In that case, please proceed to step 9 as it is.
9. Press the [
OK
] button several times to close all Windows
setting screens.
The microphone input level adjustment of the personal com-
puter is completed with the above.
Continue to adjust the speaker output level of the personal
computer.