Yahee
tech
11
14
12
13
Step 1
11
10
12
Step 2
10
Step 3
Step 4
Step 5
Step 6
Assembly Instructions
WARNING:
1. Two adults are needed to assemble this table.
2. We recommend the use of gloves to avoid undesired injury during the assembling.
Assemble Board 11,12,13,14 as shown above by
using Screw A to finish the drawer frame. Repeat
in the same manner for the other drawer.
Insert Drawer Bottom Board 18 into the frame and
attach Front Panel 10 by using Triple Pieces Screw
Set B & C. Repeat in the same manner for the other
drawer.
Attach Handle H to the front panel of drawer by
using Screw I. Attach Sliding Rail G with wheels
to both sides of the bottom of the drawer by using
Screw F. Pay attention to the direction of the
sliding rail.
Assemble the separated Sliding Rail J with steel
balls to the top of Board 8 & 9. Assemble Sliding
Rail J without balls to Panel 15 & 17. Pay attention
to the separation of the sliding rail and the direction
of the sliding rail and Board 8 & 9.
Attach Sliding Rail G without wheels to Board 6,8,9
by using Screw F. Pay attention to the direction of
sliding rail. Assemble Triple Pieces Screw Set B
to the position as shown above and tighten them.
Attach Board 15,16,17 to Board 1 by using Triple
Pieces Screw Set B & D.
4／7
YAHEE
