>
2X
1034426J-4/21
rotate the pivot arm
up until the hook
rests on the bike tire
1” or less from the
brakes or the fork.
failure to place wheel
hook in the correct
position can cause
your bicycle to eject,
and cause personal
injury, property
damage, or death.
SWING PIVOT ARM INTO PLACE.
CAUTIon:
If any part
of your bike comes in
contact with the red
trigger, do not use this
carrier with that bike.
FOLd HOLduP dOWN.
Be sure pivot
arms are
folded down.
• Pull spring pin to release base.
• Fold down holdup
• Release Pin. Pin should snap
into place.
note: Holdup can fold down
past horizontal to aid in
loading your bikes.
LOAd HEAVIEST BIkE FIRST.
PREPARE FOR LOAdING.
Do not install if your bike
has a flat tire or has a slow
leak. Lost tire pressure
after install may result in
an insecure load.
Tuck strap into slot at
rear of wheeltray.
release wheelstrap by pressing the
lever on the buckle.
If a fender prevents proper placement
of the wheel hook, remove the fender
for proper and safe loading.
be sure to return the holdUp to the locked
horizontal position after loading.
Do not push
arm beyond
horizontal.
