5
Connections
AV connection to a TV set
with 21-pin scart terminal
!
Peripheral equipment and cables, sold
separately unless otherwise indicated.
!
When playing some DVD discs, TV volume level
may be lower than from some other sources,
adjust the TV volume to your desired level.
Disc playback
1
.
Press the POWER button
(
1
)
displayed on
the front panel.
2
.
Press the OPEN/CLOSE button
(
2
)
.
This will open the disc tray, and
place a playable disc on it with
the playback side down.
3
.
Press ENTER/PLAY
(
3
)
.
After closing the disc tray, playback will start.
As the DVD video player is reading the disc, a
menu will appear on screen or you may access
the menu by pressing the TITLE button (
4
).
4
.
Select a title/chapter or track.
Press
and
(
5
) during playback to move
between tracks.
You also can press
(
6
) or the number
buttons to select the title/chapter or track.
!
Moving the DVD video player during playback may cause damage to the disc as well as the
player.
!
To open and close the disc tray, you may only use the OPEN/CLOSE button on the remote
control or DVD video player.
!
If the picture on TV screen will keep going up and down, press the P/N button on the remote
control to set the correct type, PAL or NTSC or just MULTI.
5
.
Stop playback
Press the STOP
button (
7
)
once, the player is
stopped, and you can
press the RESUME
button (
8
) to replay from
the point stopped.
Press the STOP button (
7
)
twice, the player is
stopped, then press the
ENTER/PLAY button (
3
) to
playback from the start.
1
2
3
4
7
5
6
6
6
6
8
2
