YDV4202-V1
The monitor can be set to control 2 locks while you should set the unlock2 item to "on "
state.
The code number of 8015 is used to set the unlock2 OFF. This setting is for only one lock.
The code number of 8014 is used to set the unlock2 ON. This setting is to control two locks.
2 locks control:
1
2
Note: During a call or while monitoring outside,
press UNLOCK button. Two unlock icons will be
showed. Use
/
button to select the
lock you want, and press UNLOCK or
MENU button to release the corresponding
door, press
to exit.
Restore to default operation will not
change this parameter.
How to set the slave monitor address
Maximum 4 monitors can be connected in one apartment, one master monitor
together with 3 slave monitors. Monitor address should be set correctly
(one monitor must be set as master monitor)
Code 8000 is used to set the master monitor.
Code 8001 is used to set the first slave monitor.
Code 8003 is used to set the third slave monitor.
Code 8002 is used to set the second slave monitor.
Language mode setting
This monitor can support multiple languages. To change the language, input the
corresponding language code. The language code number are as follows:
8101: English
8102: French
8103: Spanish
8104: Italian
8105: German
8106: Dutch
8107: Portuguese
8108: S-Chinese
8109: T-Chinese
8110: Greek
8111: Turkish
8112: Polish
8113: Russian
8114: Slovakia
8115: Hungry
8116: Czech
8117: Hebrew
......
Note:the monitor can only support 4 types of languages.English,French,Spanish and
German are default.
