4
An ASSA ABLOY Group brand
100 Yale Avenue, Lenoir City, TN 37771 • Product Support Tel 800.438.1951 • Fax 800.338.0965 • www.yalecommercial.com
Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective
owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Yale Security Inc., an ASSA ABLOY Group
company reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 2006, 2008, Yale Security Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Dummy Trim
See Interior Mechanism Housing Installation
Page 3 For Installation Instructions
P/N 80-9510-0056-010 Rev B
REMOVAL OF CYLINDER
When not installed on door
REMOVAL OF CYLINDER
When installed on door
Remove the loose plate from the
back of the cylinder. Two screws
hold a metal strap in place. Under
the “C” cutout in this strap is a
semicircular indention in a spring
loaded tab. Using the cylinder
removing tool (wire with loop) or a
screwdriver, place the tip of the tool
against the tab in the indention and
push toward the center and then
clockwise. The purpose is to move
the cylinder and strap to the left.
When all the way left, push the
cylinder out of the housing.
Note: it may be necessary to put
the tool in between the gap created
on the right and force the cylinder
to the left. Remove the plug
assembly from the cylinder housing
for re-keying.
Insert the key into the plug. Press
the
cylinder removing tool into the hole
positioned at 5 o’clock and turn the
key counterclockwise. This will
cause the face of the cylinder to
rotate to the left slightly. Once
turned off center, pull on the key to
remove the cylinder. Remove the
plug assembly from the cylinder
housing for re-keying.
