12
WARNING LIGHTS
Low Battery Alert
When the battery level is below 20% the LED flashes Red slowly every 2
seconds.
Sleep Mode
If the remote control does not operate for 10 seconds, the device will enter
sleep mode.
OTA (Over The Air Update)
The OTA is a wireless update used to ensure the latest actuator software
updates are installed for the Aeron to operate correctly. During the OTA
process the LED will flash Green. When an OTA update is successful, the
remote LED will illuminate Green for 3 seconds.
If the OTA update fails the LED will illuminate Red for 3 seconds.
Factory Reset Remote
If the remote has paired to the app, you must first reset the remote on the
app. On the back of the remote, under the battery cover is a reset button.
Push a paperclip into the reset hole and press for 5 seconds. Ensure the
batteries are still installed in the remote. The LED light on the front of the
remote will flash Green when the remote has been reset. Restarting the
remote will automatically place it into pairing mode.
GLOSSARY
Group
Group is a group of windows assigned to a particular
area “Group”.
Hub
The hub connects to your Aeron actuator module
via Zigbee. The hub also connects to your Wi-Fi
router and Yale server, which gives you the ability to
control your actuators from the app remotely.
