An ASSA ABLOY Group brand
80-9150-8005-010 (10-12)
4
Programming Instructions:
Code used for entry. The Master Code is always User Number 1 and is used only for
programming. The Master Code will not unlock the lock.
Use the record log on the last page to assign and log all user codes before proceeding on
to programming. Store the log in a secure location.
Example:
User Type
User Number
User Code
Master
1
1 2 3 4 Factory Setting
Emergency
2
4 3 2 1 Factory Setting
Supervis o r
3
Select 4- 7 digits
L o
c
k o u t
4
Select 4-7 digits
Passage
5
Select 4-7 digits
U
s e r
6 - 9 9
Select 2-7 digits per user
NO PROGRAMMING CAN BE MADE UNTIL THE MASTER & EMERGENCY CODES ARE
CHANGED FROM THE FACTORY SETTINGS
(Enter only underlined items into the keypad)
1-Change the Master Code
EXAMPLE: Change the Master Code from 1234 (factory default) to 3131.
# (Hold pound depressed until Yellow LED blinks continuously)
Enter current Master Code
1234 #
Yellow LED Blinks
Enter Program Command Code(PCC)
51#
Yellow LED Blinks
Enter User Number
1 #
Yellow LED Blinks
Enter New Master Code (4-7 digits)
3131#
Yellow LED Blinks
Re-enter New Master Code (4-7 digits)
3131#
Green
LED Blinks
Note: If Master Code is unknown (Red LED will flash instead of Yellow) refer to step 3.
2-Change the Emergency Code
# (Hold pound depressed until Yellow LED blinks continuously)
Enter current Master Code
3131#
Yellow LED Blinks
Enter Program Command Code
51#
Yellow LED Blinks
Enter User Number
2 #
Yellow LED Blinks
Enter New Emergency Code (4-7digit)
4848#
Yellow LED Blinks
Re-enter New Emergency Code (4-7digit)
4848 #
Yellow LED Blinks
Emergency Code defaults to a 10 second Unlock time
Note: Emergency code is deleted when clear memory is used and must be reprogrammed.
Yellow LED Blinks
Green
LED Blinks
EXAMPLE: Change the Emergency Code from 4321 (Factory Defualt) to 4848
(See Example 1)
®
