SAFETY PRECAUTIONS
MAINTENANCE AND REPAIR
•
The Service Manuals are updated on a regular basis, but may not reflect recent design changes to the
product. Updated technical service information may be available from your local authorized Yale
®
dealer. Service Manuals provide general guidelines for maintenance and service and are intended for
use by trained and experienced technicians. Failure to properly maintain equipment or to follow
instructions contained in the Service Manual could result in damage to the products, personal injury,
property damage or death.
•
When lifting parts or assemblies, make sure all slings, chains, or cables are correctly fastened, and that
the load being lifted is balanced. Make sure the crane, cables, and chains have the capacity to support
the weight of the load.
•
Do not lift heavy parts by hand, use a lifting mechanism.
•
Wear safety glasses.
•
DISCONNECT THE BATTERY CONNECTOR before doing any maintenance or repair on electric lift
trucks. Disconnect the battery ground cable on internal combustion lift trucks.
•
Always use correct blocks to prevent the unit from rolling or falling. See HOW TO PUT THE LIFT
TRUCK ON BLOCKS in the
Operating Manual
or the
Periodic Maintenance
section.
•
Keep the unit clean and the working area clean and orderly.
•
Use the correct tools for the job.
•
Keep the tools clean and in good condition.
•
Always use
YALE APPROVED
parts when making repairs. Replacement parts must meet or exceed
the specifications of the original equipment manufacturer.
•
Make sure all nuts, bolts, snap rings, and other fastening devices are removed before using force to
remove parts.
•
Always fasten a DO NOT OPERATE tag to the controls of the unit when making repairs, or if the unit
needs repairs.
•
Be sure to follow the
WARNING
and
CAUTION
notes in the instructions.
•
Gasoline, Liquid Petroleum Gas (LPG), Compressed Natural Gas (CNG), and Diesel fuel are
flammable. Be sure to follow the necessary safety precautions when handling these fuels and when
working on these fuel systems.
•
Batteries generate flammable gas when they are being charged. Keep fire and sparks away from the
area. Make sure the area is well ventilated.
NOTE:
The following symbols and words indicate safety information in
this manual:
WARNING
Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury and property damage.
Summary of Contents for ERC030VA
