INTRODUCTION
The Password Screen is a main menu (top-level menu) that is visible at Service Technician, Supervisor, and
Operator password access levels. When the key switch or keyless switch is turned on, the Password Screen is
the first screen displayed (unless Operator Passwords are deactivated). To access this menu at another time,
cycle through the main title screens by pressing the
Scroll Back Key
(
!!
—
) or
Scroll Forward Key
(
—
▸
)
until the Password Screen is displayed, as shown in
. Next, press the
Enter Key
(
*
) to enter the
Password Screen.
The Password Screen also appears when an operator first starts to use a lift truck, and it also appears when a
defined time limit is exceeded under certain conditions.
There are no submenus below the Password Screen, but there are submenus under two other top-level menus
that involve passwords:
•
The Add/Remove Password submenu under the Truck Setup menu
•
The Password Log submenu under the Activity Log menu
Explanations of the Password Screen and the Add/Remove Password submenu (accessed through the Truck
Setup menu) follow.
PASSWORD SCREEN
NOTE:
Operator passwords are used only on trucks equipped with a software enable option.
As already stated, the Password Screen is the first screen to appear when the key switch or keyless switch is
turned on (unless Operator Passwords are deactivated). The Password Screen is visible at all password access
levels.
shows the initial Password Screen that is displayed after power
ON
. A line of five blanks below the
Password Icon serves as the password entry field.
Figure 16. Initial Password Screen
NOTE:
A valid password must be a five digit number composed of only the numbers 0, 1, 2, 3, 4, 5,
6, 7, 8, and 9 such as 37524 or 22954. If invalid keys (i.e., #, or *) are pressed they will be ignored.
If more than five valid numbers are pressed for the password, only the last five are accepted.
Service Technician Password Setup
Service Technician-level password access is required to add, delete, or edit Service Level Passwords and to do
the first installation of a Supervisor-level password. Anyone with Service Technician-level access can add,
delete, or edit Operator or Supervisor passwords.
Summary of Contents for ERC030VA
