①
Keypad
②
C
ard
Key
Reader
③
Fingerprint
Senor
After install the network module, the registration process as below:
Product
Function
※
Network
M
odule (
O
ption
al
)
4.1 Network
M
odule Settings
This product can use a variety of functions through simple settings; confirm the
model of the product currently in use before upgrading the function.
Before installing the network module, please set to the master mode.
4.2 Network
M
odule
I
nstallation
5.1 How to
O
pen the
D
oor
5.1.1
Use Fingerprint, Pin Code, Card Key to
U
nlock
5.
1.2 Mechanical Key Unlock
In the event of an emergency, such as forgetting the password, running out of
battery power, or unoperability of the system, you can use a spare mechanical key
to unlock the door.
Network module Registration
Regist-
ration
Continue /
Complete
Registration process
In normal mode, Security enhancement to enter any number before or after
entering a password to prevent the PIN code from being exposed.
In master mode, Fake PIN Code function is not supported.
Emergency Keyhole
①
Touch the key area with your palm, wake up the key, enter the added
password, and press [ ] to confirm.
②
Put the registered door card in the door card identification area.
③
Put the registered finger on the fingerprint reader.
9
10
After install the network module, when the smart lock pair or unpaired with the
mobile App, all previously registered user information (except the administrator
password): fingerprints, passwords, and cards key will be automatically deleted.
After the smart lock is connected to the Internet, all operations such as user
management and system settings can only be performed in the mobile app.
Notice
①
Open the battery cover on main body and
remove all batteries;
②
Install the module in the module slot;
③
Reinstall the battery: Pay attention to the
positive and negative directions.
Notice
