12
Sabbath mode
•
Press and hold buttons
and
at the same time for at least 5 seconds to enter or exit Sabbath mode. In
this mode, LED will display "Sb". This mode turns off the displays, interior light and prevents them from turning on
again. Normal cooling operations will still take place. The compressor and the fan work normally.
•
When the cabinet power off, it will not automatically exit Sabbath mode, and it will keep Sabbath mode
when power on again. The Sabbath Mode will automatically turn off after 96 hours.
Temperature Alarm Function
If the internal temperature
≥30°C (86°F) for 2 hours, the high temperature alarm will be activated, the LED will display
"HH", the buzzer will sound continuously, the cooling system continues to work. The display return to normal until the
high temperature conditions is relieved.
If the internal temperature is <0°C (32°F) for 1 hour, the low temperature alarm will be activated, the LED will display
"LL", the buzzer will sound continuously, the cooling system will stop working. The display return to normal until the
low temperature is relieved.
NOTE:
•
It is normal that the cabinet shows “HH” or “LL” from time to time. If it occurs frequently or lasts for a long time, you
can restart the unit by unplugging it, then re-plugging after 5 minutes. If the problem occurs again after restarting,
please contact customer service.
•
Before reconnecting the power, wait 3 to 5 minutes. Otherwise you could damage your appliance. If you attempt
to start the appliance before the end of this time delay, the appliance will not turn on.
•
If you turn on the appliance for the first time or after a restart, or after it has been out of operation for a long time,
there may be a temperature difference between the temperature inside the appliance and that on the LED display.
This is a normal event caused by the duration of the activation period. Leave the appliance turned on for several
hours and the temperatures will stabilize during operation.
