4
connections in accordance with state and local codes. A
standard electrical supply (115V AC 60 Hz), properly
grounded in accordance with the National Electrical Code
and local codes and ordinances, is required.
•
Do not kink or pinch the power supply cord of the appliance.
•
The fuse (or circuit breaker) size should be 15 amps or
higher.
•
It is important for the appliance to be leveled in order to
work properly. You may need to make several adjustments
to level it.
•
Although the unit has been tested at the factory, due to
transit and storage, you should clean the appliance before
use.
•
Do not use alcohol-based, solvent-based cleaning agents
or abrasives on the interior. These cleaners may damage or
discolor the interior.
•
Do not use this apparatus for other than residential
purposes.
•
This appliance is CFC- and HFC-free and contains small
quantities of Isobutane (R600a) which is environmentally
friendly, but flammable. It does not damage the ozone layer,
nor does it increase the greenhouse effect. Care must be
taken during transportation and setting up of the appliance
that no parts of the cooling system are damaged. Leaking
coolant can ignite and may damage the eyes.
•
In the event of any damage:
ￚ
Avoid open flames and anything that creates a spark,
ￚ
Disconnect from the electrical power line,
ￚ
Air the room in which the appliance is located for several
minutes, and Contact the Service Department for advice.
•
The more coolant there is in an appliance, the larger the
room it should be installed in. In the event of a leakage, if
the appliance is in a small room, there is the danger of
combustible gases building up. For every ounce of coolant,
at least 325 cubic feet of room space is required. The
