Yale Real Living Touchscreen Lever, Installation And Programming Manual

17

An ASSA ABLOY Group brand

P/N AYRT-220-INST-FUL Rev B

    Factory Default Settings

*

Upon reset (and initialization) of the lock, Master PIN Code     

 Registration is the 

only option available

 and 

must be        

 performed

 prior to any other programming of the lock.

Settings

Factory Default

Master PIN Code

Registration 

required

Automatic Re-lock

Disabled

Inside Indicator Light

Disabled (Off)

One Touch Locking

Enabled

Volume Setting

Enabled (Low)

Automatic Re-lock Time

**30 Seconds

Wrong Code Entry Limit

**5 Times

Shutdown Time

**60 Seconds

**Adjustable only when using Network Module

To reset the lock to factory default, see the following:

The following procedure returns the lock to its factory defaults 
by deleting all user codes 

(including the Master PIN code

*

) 

and           

returning all programming features to their original factory default 
settings (see table below).  
1. Remove the batteries and then remove the interior escutcheon       
    to access the reset button.
2. The reset button (see image at right) is located above the  

    PCB cable connector. 
3. Hold down the reset button for a minimum of 3 seconds and      
    then reinstall the batteries; once the batteries are properly          
    installed, release the reset button. 
All features, including adjustable settings** (see below) should     
now be returned to factory default.

    Reset Lock to Factory Default

Reset Button

Interior Escutcheon

See 

this section 

for programming instructions.