12
Command Class Door Lock, Version 4*
* This command class requires security.
Yale Z-Wave Plus
™
locks support three door lock modes: Door Secured (0xFF),
Door Unsecured (0x00), and Door Unsecured with timeout (0x01). When Auto
Relock is enabled, the lock will automatically relock after all unlock events. Yale Z-
Wave Plus
™
locks do not support any of the
“Door Unsecured for outside
Door
Handles
”
(0x20, 0x21) or
“Door Unsecured for inside
Door Handles
” (0x10, 0x11)
modes.
Command Class Door Lock Logging, Version 1*
* This command class requires security.
This command class has been implemented per the Z-Wave
™
Specification.
Command Class Schedule Entry Lock, Version 3*
* This command class requires security.
Yale locks support Year Day Schedule types and Daily Repeating Schedule types.
Yale locks allow the controller to apply multiple schedules to a single user. Each
user has 1 Year Day Schedule slot (Slot ID 1) and 7 Daily Repeating slots (Slot IDs
1
–
7). If user scheduling is used in the lock, then the controller
MUST
set the
lock
’
s time using the Time Parameters command class.
Command Class User Code, Version 2*
* This command class requires security.
Versions 1 and 2 of this command class can address user code slots 1 through 250
via the User Code Set/Get/Report commands. Version 2 of this command class also
includes extended versions of each of these commands, used to address the
extended range of users.
Summary of Contents for real Living YRC226
Page 8: ...Changing Handing if necessary continued 3 8 P N Rev G YRL EMICL TSINSTL FUL...
Page 16: ...16 P N Rev G YRL EMICL TSINSTL FUL Testing Deadbolt Latchbolt Operation Outside of Door...
Page 17: ...17 P N Rev G YRL EMICL TSINSTL FUL 10 Remove Battery Cover Loosen screw to remove cover...
Page 35: ...35 P N Rev G YRL EMICL TSINSTL FUL Programming Troubleshooting Symptom Suggested Action...
