M
Register
M
MasterPINSetting*
RegisterUserPIN
Delete
1
2
3
4
User Number (UN)
1~25 : without network module
1~250 : with network module
5
Complete
Continue
Complete
Continue
U
Enable
Disable
High
Low
Silent
English
Spanish
French
Enable
Disable
Register
Delete
AutoRelock
HCPModule
Setting**
Volume
Language
AllCodeLock-Out
Programming
• For proper security, the
Master
PIN code* must be changed
prior to programming the lock.
• PIN codes can be 4 to 8
digits in length.
• The
key
is used to enter or
accept an entry, and also to
conclude a programming
session.
• The
key is used either to
enter or to continue additional
steps in a programming
sequence.
*The factory default
Master
PIN code is: 1 2 3 4 5 6 7 8.
Features
Open Door With PIN Code
1. Touch the screen with
the back of your hand
or fingers to activate.
2. Enter PIN code.
3. Touch the
key to confirm
the selection.
4. Unlock.
1. Touch the screen with
the back of your hand
or fingers to activate
.
2. Enter the 4-8 digit Master
PIN code* followed by
the key.
Lock Response: “
Menu
mode, enter number, press
the
key to continue
.”
3. Enter digit corresponding
to the function to be
performed followed by
the key.
Follow the voice
commands.
4. Press the key to
complete the process
and conclude the
programming session.
Note: If the lock is
connected to a controller,
it is recommended that it
be programmed through the
centralized user interface
(PC or hand-held device)
to ensure communication
between the lock and the
controller unit.
**Thisfunctionappearsonly
withnetworkmoduleinstalled.
For Technical Assistance call Yale:
1-800-810-WIRE (9473).
Formoreinformationgoto:www.yalerealliving.com
Touchscreen Deadbolt Quickstart Guide
™
P/N A
YRD220-INST
-QUK Rev B
An ASSA ABLOY Group brand
Yale Real Living
*DefaultMasterPinCodemustbechanged
priortoanyprogrammingoflock.