15
P/N
-220-
-
Rev F
AYRD
INST FUL
When lock is reset to factory defaults all user codes
(including the Master
code*) are deleted and all
PIN
programming features are reset to original default
settings (see below).
1. Remove the battery cover and batteries.
2. Remove the interior escutcheon to access the
reset button.
3. The reset button (see image at right) is located
above the
cable connector.
PCB
4. While pressing the reset button (minimum of 3
seconds) reinstall batteries. Release reset button.
5. Replace battery cover.
Upon reset, Master
Code creation is the only
PIN
option available and must be performed prior to any
other programming of the lock.
Registration
required*
Wrong Code Entry Limit
5 Times
One Touch Locking
Enabled
Inside Indicator Light
Disabled (Off)
Interior Escutcheon
Factory Settings
Resetting Lock to Factory Default
Settings
Factory Setting
Master
Code
PIN
Automatic Re-lock
Disabled
Volume Setting
Enabled (Low)
Automatic Re-lock Time
30 Seconds
Shutdown Time
60 Seconds
*The Master
code must be registered prior to any other programming of
PIN
the lock.
