10
An ASSA ABLOY Group brand
P/N AYRD220-INST-FUL Rev C
Definitions
Low Battery Warning
1
All Code Lockout Mode
2
Return to previous step
3
Status Indicators
**Adjustable only when using Network Module
All Code Lockout Mode
:
This feature is enabled by the Master PIN code. When enabled, it restricts all user PIN
code access (except the Master PIN code). When the unit is in Lockout Mode, the red locked padlock (see above)
will appear on the screen when attempting to enter a PIN code.
Automatic Re-lock Time
:
After successful code entry and the unit unlocks, it will automatically re-lock after a
default of thirty (30) seconds. Re-lock time is adjustable** from 10- 240 seconds (with Network Module 10 seconds
is default).
Inside Indicator Light
:
Located on the inside escutcheon, it shows active status (Locked) of lock and can be
enabled or disabled in the
Advanced Lock Settings
(Main Menu selection #3).
Language Setting Mode:
Choosing English (1), Spanish (2) or French (3) becomes the (default) setting for the
lock's voice prompts.
Low Battery
:
When battery power is low, the Low Battery Warning Indicator flashes RED. If battery power is com-
pletely lost, use the cylinder key override.
Master PIN Code
:
The Master code is used for programming and for feature settings and
must be registered
prior to programming the lock.
The Master code will also operate the lock.
Network Module Setting:
With the optional Network Module installed, this setting becomes available through
the Main Menu (7) and allows the lock to connect with a network controller.
One Touch Locking:
When the latch is retracted, activating the keypad will extend the latch (during Automatic
Re-lock duration or when Automatic Re-lock is disabled). When One-Touch Re-lock is
not
in use (
disabled
), any
valid PIN code will re-lock the lock.
Previous:
While in Menu Mode,
p
ressing this icon (#3 above) cancels the current operation and returns the user to
the previous step.
Privacy Mode Button:
Pressing and holding the Privacy button (found below thumbturn) for a duration of four
beeps deactivates the keypad, and because it is set from the inside, provides a secure lock for the convenience of
the occupant(s).
Shutdown Time
:
The unit will shutdown (flashing RED) for a default** of sixty (60) seconds and not allow opera-
tion after the wrong code entry limit (5 attempts) has been met.
Tamper Alert:
Audible alarm if attempting to forcibly remove outside lock from door.
User PIN Code
:
The User code operates the lock. Maximum number of user codes is 250 with Network Module;
without Network Module, maximum is 25 user codes. When deleting User PIN code(s), screen will display User
Number (not PIN code) being deleted.
Volume Setting Mode
:
The volume setting for PIN code verification is set to
Low (2) by default;
otherwise it can
be set to
Silent (3)
for quiet areas, or it can be set to
High (1).
Wrong Code Entry Limit
:
After a specified number of unsuccessful attempts at entering a PIN code the unit will
shut down and not allow operation. Limit is adjustable** from one (1) to ten (10) times. (With no RF network enabled
default is 5; 10 with RF network enabled).