L
R
Y
S
Z
Installation Sequence (Con’t)
Page 3
!
Mount closer on door.
Power
Adjustment Nut
DOWN
Left Hand Door
UP
Right Hand Door
(A drop plate is available for
use on doors having narrow top rails)
should be away from hinge. Valves
are
for
. Valves are
for
.
!
Use 1/8” hex wrench to close valves. Turn Clockwise.
For
, close valves ‘S/D’ and ‘L’.
, close valves ‘S’ and ‘L’.
STANDARD CLOSER
DELAYED ACTION CLOSER
!
Set handing of “Arm Stop” on soffit plate. See
illustration on Page 1 for positions. If required, rotate
stop. Secure with 1/4-20 x 5/16 machine screw.
With door closed, use wrench to rotate pinion shaft
as illustrated below.
!
Caution: Closer arm is under spring tension and
may be difficult to rotate.
Start (wrench) here
Rotate
Install arm here
!
Place main arm on shaft,
aligning mark on arm with
pinion flat on pinion shaft; “Z” for Left Hand Door; “Y”
for Right Hand Door. Secure with 1/4-20 x 1/2 (13)
round head machine screw with lock washer.
80-9344-0625-010 (06-09)
Main Arm Screw with Lock Washer
!
!
Reopen valves closed in Step 2. Turn
Counterclockwise
With door closed, align soffit plate with mounting
holes in frame. Fasten soffit plate to frame with flat
head screws provided.
CAUTION!
DO NOT BACK VALVES OUT OF
CLOSER OR A LEAK WILL RESULT
!
Install Cover:
Security closers only,
(SCP4420/SCP4020) Install
cover bracket to closer body. (See Illustration below).
Fasten bracket with 2 #8-32 x 5/16 RHMS screws
provided.
Fasten cover to closer and cover bracket with 4 #8-
32x1/4 round head screws provided.
Bracket must
extend
underneath
tube
