7
Inspection and maintenance
03.2018
61
ba
-o
.2
.6
.0
-us
-1.
1-
y
|
A
11
86
75
01
R
ev
A
A
7.2
Maintenance intervals
Fig. 71
Per
iodic insp
ect
ion
eve
ry 12
m
on
ths
*2
Wor
k eve
ry 5
yea
rs
Wor
k eve
ry 10
yea
rs
Maintenance table
see page
●
Brake (20), measure air gap, replace brake disk if necessary
●
Overload safety device (21)
●
Grease rope (22) with brush
●
Grease rope guide (23) with brush
●
Tighten clamping points for electric cables
●
Oil change (normal mode)
●
Oil change in case of ambient temperatures
131°F and engine rating M7 and higher
Periodic inspections including maintenance at least every 12 months, possibly more
frequently if so prescribed by national regulations, to be performed by a qualified person.
*2 Heavy duty or unfavorable conditions (dirt, solvents, multi-shift operation, etc.)
entail a reduction of this inspection and maintenance interval.
NOTICE
Material damage hazard.
If increased wear or damage is ascertained when inspecting
or maintaining the hoist, the latter must not be put into operation again until the faults
have been eliminated.
W0792
22
20
23 21
20
W0793
20
W0794
