19
Changing the Batteries
(cont.)
Door/Window Contact Battery Change
When the battery is low the LED will light up when the
door/window is opened.
Note:
Door/Window Contact case tamper conditions are also
indicated by a lit LED, check the tamper before changing
the battery.
PIR Battery Change
When the battery is low the LED will flash when any motion is
detected. The batteries are changed as follows:
Key Fob Battery Change
When the battery is low the LED will glow dimly when any key is
pressed. The battery is changed as follows:
Press any key and check that the LED lights. If the LED lights the
new battery installation is successful.
Ensure tamper spring is fully depressed when re-fitting the PIR
to the back case. If this has not been done correctly this will be
indicated by a flashing LED on the PIR.
SR-SD
SR-PB
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
(23)
3 x 1.5v AA
CR 2032
SR-KF
CR 2032
3 x 1.5v AA
SR-PVC
(Lithium)
SR-PVC
2.
Unscrew
& remove
top case
3.
Remove
& replace
Batteries
4.
Refit.
1.
Disarm
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
To change the battery:
1.
Disarm
2.
Unscrew
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
5.
Replace
6.
Refit.
3.
Remove cap
top case.
4.
Remove battery
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
SR-SD
SR-PB
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
(23)
3 x 1.5v AA
CR 2032
SR-KF
CR 2032
3 x 1.5v AA
SR-PVC
(Lithium)
2.
Unscrew &
remove
3.
Remove
& replace
battery
4.
Replace cover
1.
Disarm
Alkaline
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
EF-PIR
1.
Disarm
2.
Unscrew
& remove
top case
3.
Remove
Batteries
3.
Replace
Batteries
4.
Refit.
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
SR-PC
2.
Unscrew
& remove
top case
Alkaline
1.
Disarm
3.
Remove &
replace Batteries
4.
Refit.
Please be careful when
removing case as cable
is very delicate.
Please ensure battery
is inserted correctly.