16
P/N AYRD-120-INST-FUL Rev G
Definitions
All Code Lockout Mode:
This feature is enabled by the Master code. When enabled, it restricts all user (except
Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the touchscreen flashes
8 times and the lock beeps 3 times as well.
Audio Mode:
Disable (3)
Choosing
in Audio mode shuts off the code confirmation tone play-back for use in
quiet areas. Audio mode is enabled or disabled through feature programming by the Master code.
Automatic Re-lock Time:
After a successful unlock, the unit will automatically re-lock after thirty (30) seconds.
Low Battery:
When battery power is low, the Low Battery Warning Indicator flashes RED. If battery power is
completely lost, use the 9Volt battery override. To use the 9V battery override apply 9V battery, in either
direction, to terminals below the touchscreen for backup power option. Wake up the lock and enter your pin
code to unlock the door.
Master PIN Code:
It must be created
The Master PIN code is used for programming and for feature settings.
prior to programming the lock.
The Master code will also operate (unlock/lock) the lock.
Network Setting:
This setting is available thru the main Menu (7) and allows the lock to connect with a network
controller. It is also available through the wireless button on the interior escutcheon .
One Touch Locking:
When the latch is retracted, activating the touchscreen will extend the latch (during
Automatic Re-lock duration or when Automatic Re-lock is disabled).
Shutdown Time:
The unit will shutdown (flashing touchscreen) for sixty (60) seconds and not allow operation
after the wrong code entry limit has been met.
Tamper Alert:
Audible alarm sounds if attempting to forcibly remove outside lock from door.
User PIN Code:
The User code operates the lock. Maximum number of user codes is 100.
Wrong Code Entry Limit:
After five (5) unsuccessful attempts at entering a valid PIN code, the unit will shut
down and not allow operation.
