Yale YDM 2111, User Manual

20

21

Remote Control Module 

Remote control Module

》 Install Remote Control Module 

1⃞

Remove batteries         

3⃞

Insert batteries     

2⃞

Install Remote Control Module

4⃞

Confirm the installation

If you hear a 

‘ting-a-ling’

sound, the Remote control
Module has been installed
correctly. Close the
battery cover. 

Buy the Remote control Module and install it to link the remote control. 

Open the battery cover 
in the back body 
and remove 
all batteries. 

Equip the Remote control Module
to the slot. 

Insert all the batteries by
checking the [⊕, ⊖]
connector. 

Option

Ting-a-ling

•The operation status may only be examined through the remote control.

Note

Not only FSK method but also the wireless encryption algorithm has been applied. 

Remote Control 

》 To Register Remote Control

》 To Release Remote Control 

Option

Extra Features 

•The wireless encryption algorithm resorts to the floating ID technology where the wireless 

password is changed every time the remote control is operated.

Note

Order

Play

Description 

Enter the number 7 and then, 5 again on the keypad. 

2⃞

Enter number 7 and 
5 on the keypad 

1⃞

Press

(Registration)

button and    button 

Open the battery cover in the back body. 
Press 

Ⓘ

(Registration) button and then, [#] button. 

Press the 

Ⓘ

(Registration) button in the back body again

to complete the procedure. 

3⃞

Press     

(Registration)

button 

2⃞

Enter number 0 and 
5 on the keypad 

3⃞

Register Remote control 

Order

Play

Description 

Press the SET button of the remote control 

Enter the number 0 and then, 5 button on the
keypad. 

Press the 

Ⓘ

(Registration) button in the back

body again to complete the procedure. 

4⃞

Press     

(Registration)

button 

1⃞

Press

(Registration)

button and    button 

Open the battery cover in the back body. 
Press 

Ⓘ

(Registration) button and then, [#] button.