Yale YDM 2111, User Manual

14

15

》 Outside Forced Lock Setting - CARD

Forced Lock

Contact card key

Order

Play

Description 

Contact the card key on [card key reader] for 5 seconds
until you hear 3 beeps.

Settings 

Settings 

》 To Release Safe Handle Setting

1⃞

Open the battery cover and 
take out a hex wrench. 

2⃞

Keep pressing the Safe Handle button. 

Turn the set bolt found in next to 
the handle to clockwise.

》 To Set Safe Handle 

1⃞

Open the battery cover and 
take out a hex wrench. 

2⃞

Turn the set bolt found in next to the 

handle to Counter clockwise until the 
Safe Handle button comes out.

Volume Setting Feature

It enables you adjust the volume of various sounds from the product. 

》 Volume Setting

To set volume switch 

Order

Play

Description 

The operation sound loudness is adjusted according to
the Volume Switch Setting. 
(2 : Louder / 1: Lower / 0 : Mute )

Safe Handle Feature

The technology to prevent a forced attempt to drill a hole in the door and unlock the Doorlock has been applied. 

•

Be careful that the set bolt won’t detach when modifying the Safe Handle Setting. 

•

Even when the operation sound is set as ‘Mute,’the error and alarm sounds will go off. 

Note

》 Inside Forced Lock Setting 

Set / Release Inside
Forced Lock Switch 

Order

Play

Description 

When the door is closed, move the Inside Forced Lock
Switch to 

LOCK

position so that a red sticker can be seen. 

》 Outside Forced Lock Setting - Password 

1⃞

Open the cover

2⃞

Enter password

Order

Play

Description 

Press the [#] button for 5 seconds. 
(The beeping sound sets off for 3 times.)

Open the Keypad cover.

Enter the registered password on the keypad. 

3⃞

Press    button for 

5 seconds 

•

If you try to open a door with the handle or the Manual Open/Close Device from inside when the Outside Forced Lock is set, 

the alarm goes off.

•

If the Inside Forced Lock is set, any attempt to open a door from outside whether it’d be a cardkey or a password won’t work. 

Note

Directions