Yale YDR 4111, User Manual

20

21

Settings 

Safety Feature

Directions 

Forced Lock

》 Inside Forced Lock Setting 

Set / Release Inside
Forced Lock Switch 

Order

Play

Description 

When the door is closed, move the Inside Forced Lock
Switch to 

LOCK

position so that a red sticker can be seen. 

》 Outside Forced Lock Setting - Fingerprint 

》 Outside Forced Lock Setting - Password 

1⃞

Touch with palm 

2⃞

Enter Password

Order

Play

Description 

Press the [#] button for 5 seconds. 
(A beeping sound sets off for 3 times.)

Touch the keypad of the front body gently with your
palm. 

Enter the registered Password in the 
exterior number plate. 

1⃞

Enter fingerprint 

Order

Play

Description 

Enter the registered fingerprint on the fingerprint sensor
when the operation lamp(LED) is on.

2⃞

Press    button for 
5 seconds 

Press the [#] button for 5 seconds. 
(A beeping sound sets off for 3 times.)

3⃞

Press    button for 

5 seconds 

•

If you try to open a door with the Manual thumb turn from inside when the Outside Forced Lock is set, the alarm goes off.

•

If the Inside Forced Lock is set, any attempt to open a door from outside whether it’d be a fingerprint or a Password won’t work. 

•

When setting the Outside/Inside Forced Lock, enter the number on the keypad (Smart Pad) and 

the numbers will flicker from left to right and repeat twice. 

Note

》 Break-in / Damage Alarm 

Break-in:

When someone tries to Break-in by opening 
a door when it is locked, the alarm will go off. 

Damage:

When the front body was damaged 

due to forced separation or drilling, 
the alarm will go off. 

Alarm Feature

The alarm sound continues for 30 minutes or until it is disarmed. 

Method ❶

Enter the registered Password.

Method ❷

Enter the registered Fingerprint. 

Method ❸

Press the interior 

Ⓘ

button for 5 seconds. 

•Even when the Inside Forced Lock mode is set, 

the High Temperature Alarm releases the lock status
automatically. 

》 High Temperature Alarm 

•When there’

s fire, it detects the temperature of the inside.

It not only goes off an alarm but also releases the lock
status automatically. 

Method ❶

Enter the registered Password.

Method ❷

Enter the registered Fingerprint. 

Method ❸

Press the interior 

Ⓘ

button for 5 seconds. 

•

If a door is open when the Auto Lock is not properly operated, the Trespass Alarm might go off. 

•

If the Back body is exposed to direct sunlight for a long time, the temperature sensor may operate and 
go off an alarm. 

•

Even when the Inside Forced Lock mode is set, the lock status will automatically be released if the High 
Temperature Alarm goes off. 

•

If the alarm goes off due to damage, fire, or trespass, the numbers on the keypad will light up clockwise. 
(It repeats the status for 30 minutes with alarm sound.) 

Note

Release High Temperature Alarm 

Release Trespass/Damage Alarm