Yalp Memo Installation Manual Download

Page: 26 / 26

EN_Installation manual_Memo_v2.9

- 26 -

17 Revisions

Version/Date:

Adjustments

v2.2/16-12-2015

• Split the Installation manual in ‘Assembly’ and “Installation’

• Added chapter 7

v2.3/9-05-2016

• Added ‘Installation: electronics’ (from ‘ Assembly manual’)

• Added ‘3G sim card installation’

• Improved figure cables connection with yin computer in ‘Installa-

tion: Electronics’

• Added ‘changing heads’ (from ‘Assembly manual’)

v2.4/26-07-2017

• Added Chapter 4 ‘Foundation methods’ (p. 6)

• Removed Chapter 7 ‘Indoor: Surface mount’ and Chapter 8 ‘Out-

door installation’

• Added appendices A-D (Four different foundation methods)

• Replaced support.yalp.nl into my.yalp.nl (new remote tool web ad-

dress) and replaced ‘Sona’ for ‘Memo’ (2x) in chapter 10 ‘Installa-

tion: 3G Sim card’

• Added chapter 12 ‘Adding extra plates to prevent knee entrapment’

• Added Do not yet connect the plug to step 3 in Chapter 9

v2.5/01-08-2017

• Removed chapter 15 ‘Warranty’

v2.6/04-08-2017

• Removed foundation appendices, because these are separate

documents now

v2.7/18-08-2017

• Removed chapter 10 ‘3G Sim card installation’. This is a separate

manual now.

• Removed appendices (Acces Point Names), because chapter 10

does not exist anymore.

v2.8/12-12-2017

• added small text adjustments

• added new styles

• added revisions table style

v2.9/14-12-2017

• added Imperial system units

• changed style for mounting table

• Removed maintenance and referred to ‘maintenance instruction’.

Summary of Contents for Memo



























Search results

Summary of Contents for Memo

Reviews:

Related manuals for Memo

Brands by name

Popular brands

Yalp Memo, Installation Manual

Search results

Summary of Contents for Memo

Reviews:

Related manuals for Memo

Brands by name

Popular brands