Chapter 7 Installation
The wire "Lawn" is configured for the robot to mow normally. When it returns to the charging
station it will follow the trackborder until it reaches the station "Loop" wire. It will then follow
the wire until it reaches the station.
Figure 90: Dimensions of the station loop
•
The distance between the station and the end of the station loop (Length/2) is 2.5m
maximum. The total length of the loop is 5m.
•
The Width of the loop is Maximum track border width + 0.5m
This therefor represents an absolute maximum width of 3.0m
•
The depth of the loop wire within the field to be mowed (D1) must be 0.25m
Figure 91: Depth of loop wire within the field to be mowed
•
If the station is located outside of the field to be mowed, the depth of the loop wire (D2) can
be a maximum depth of 0.07m.
Figure 92: Depth of loop wire outside of the field to be mowed
When installing the wire for the "lawn" loop all the conditions described in
(page 48) must be respected. This includes the conditions required for
multi-fields.
Turfmow 1000 Technician's Manual
Version: Release 3.5
Last updated: 2018-12-20
89
