Chapter 8 Using your robot
Cutting heads
Enable/disable specific cutting heads
(page 103).
Border
Sets the
number of times the border mode is used each week
(page 104).
Note: This option is only available for a single field installation which uses a
positioning beacon to locate the charging station.
Cutting height
the cutting height of the blades
(page 105).
System locking
Implements
a PIN code before a command can be executed
(page 106).
Schedule
This command enables you define the times during the week when the robot will mow the
grass.
•
A mowing schedule can be defined for each day of the week.
•
A number of mowing periods can be defined for each day and each parcel.
•
Each defined period can be active (implemented) or inactive (ignored).
•
A schedule for one day, and for one parcel, can be copied to other days of the week.
•
The complete schedule can be ignored and the robot set to work at all times.
To define a mowing schedule
Note: By default when the robot is delivered, the schedule is set to work continuously.
1.
Press
.
2.
Press the up
and down
arrows to highlight
Schedule
, then press .
A screen like the one below will appear. In the example below, there are two columns for
each day because there are two parcels that have been defined. This shows the current
schedule, where the white blocks represent the time when the robot will be operating in
one parcel.
Note: By default all the time periods will appear white, meaning the robot will
work continuously.
3.
Use the arrow keys to highlight
Edit
and press .
The following screen appears.
Turfmow 1000 Technician's Manual
Version: Release 3.5
Last updated: 2018-12-20
101