4
Part No.
Description
Size
N831488
HR-3G10
Oil
1/2 × 1m
G1/2
686455
Male fitting
G1/2- R3/8
680140
Male fitting
G3/8- R3/8
684517
Male fitting
G3/8- G1/4
N831888
HR-3WH15 Warm Water
3/8 × 1m
G3/8
685919
Male fitting
G3/8- R3/8
854671
HR-4A15
Air
1/2 × 1m
R1/2
686452
Union Adapter Rc1/2 - G1/2
N830889
HR-4W15
Water
1/2 × 1m
R1/2
686454
Male fitting
G1/2 - R1/2
N831689
HR-4G15
Oil
1/2 × 1m
G1/2
681785
Male fitting
G1/2 - R1/2
G3/8
Hose Reel
889
Hose Reel
888
N832888
HR-3C15
Grease
3/8 × 1m
Product No. Description
Model
Application
Intake Hose
Hose Size Outlet
Fitting (accessory)
2.3 Connection to the pipework system
(Fig.13)
Install a stop valve on the pipe system before connecting the hose.
1) Attach the ring on the arm. (Fig.13)
2) Pass the intake hose through the ring and connect it to the pipe
work.
Use the provided hose fitting if necessary. (See Table 1)
3) Check that the intake hose is not twisted or strained after
connection.
■
Table 1
3. Operation
The hose reel is delivered with a ratchet mechanism which retains the
hose in the required outdrawn position. (Fig.14)
The ratchet will disengage if the hose is drawn out a little further and the
hose then recoils to the drum. It should be noted that the hose should be
held by the hand as long as possible during the recoiling.
CAUTION
- When pulling out the supply hose, always hold the hose and pull it out straight. The hose may be
damaged if excessive force is applied to the hose fittings.
- Do not let go of the hose when rewinding to prevent it from being wound vigorously onto the drum.
- You may burn your hand by friction if you allow the hose to retract vigorously, holding it.
- Use Pivoting wall bracket (optional extra: N372407, N372408) if you want to pull the hose to the side.
- Do not pull out or wind up the supply hose vigorously. Rough handling may affect the function of each
part or cause product malfunction or damage to the hose.
Fig.13
Fig.14
ratchet mechanism
