3
■
FP
□
, FV
□
, FDT types
▪
Remove the 4 retainer nuts from the out manifold, and
remove the out manifold. [Fig.4.5]
<
NOTE
>
▪
When the retainer nuts both side of the tie rod remove,
the in manifold removes.(
NDP-5 )
▪
Remove the O ring, valve stopper, flat valve and valve seat.
[Fig.4.6]
▪
Turn over the main body assembly. [Fig.4.7]
▪
Pull out the bolt, and remove the base and in manifold.
(
NDP-5 )
▪
Remove the 4 retainer bolts from the in manifold, and
remove the base and in manifold. ( NDP-15 ) [Fig.4.7]
▪
Remove the O ring, valve seat, flat valve and valve stopper.
[Fig.4.8]
