3
■
BP
□
, BV
□
types
▪
Remove the 4 retainer nuts from the upper side of tie rods,
and remove the out manifold. [Fig.4.5]
<NOTE>
▪
When the retainer nuts both sides of the tie rod remove, the
in manifold removes.
▪
Remove the O ring, valve stopper, ball and valve seat.
[Fig.4.6]
▪
Turn over the main body assembly. [Fig.4.7]
▪
Pull out the tie rod, and remove the base and in manifold.
[Fig.4.7]
▪
Remove the O ring, valve seat, ball and valve stopper.
[Fig.4.8]
