manualshive.com logo in svg

Yamaha 006IPTO-F0, Owner'S Manual

The Yamaha 006IPTO-F0 is a high-performance product that comes with a comprehensive Owner's Manual for easy installation and usage. You can now conveniently download the manual for free from our website, ensuring a hassle-free experience with your Yamaha 006IPTO-F0.

Share
Download
background image

Automix Main Page

203

DM1000 Version 2—Owner’s Manual

Automix

16

J

OVERWRITE section

This section enables you to select parameters to be recorded on the first pass, and rere-
corded (i.e., overwritten) on subsequent passes. You can select or deselect these param-
eters while recording is in progress (see page 190).

K

AUTOMIX ENABLED/DISABLED

This parameter enables or disables the Automix. When the parameter is set to DISABLE, 
you cannot record or play back an Automix. If the ESAM function is enabled, you can-
not enable the Automix.

L

NEW

Move the cursor to the NEW button, then press [ENTER] to create a new Automix. 
When you create a new Automix, a Scene recall event to recall the current Scene (i.e., the 
last Scene recalled) is automatically inserted at the start of the Automix. (You can edit 
this event so that you will be able to recall another Scene.)

M

UNDO

Move the cursor to this button, then press [ENTER] to undo various Automix opera-
tions (Undo function). When you record new events in an Automix, or when you per-
form an offline edit, the current Automix data is copied to the Undo buffer. You can 
retrieve the data from the buffer by moving the cursor to the UNDO button and press-
ing [ENTER] while Automix is stopped. You can also cancel the Undo operation (Redo 
function).

N

INSERT

Move the cursor to this button, then press [ENTER] to insert the current mix parame-
ters into the current Automix data. This is useful when you want to quickly replace the 
Automix data in the specified range (e.g., to replace dialogs). Refer to “Inserting Mix 
Parameters into Automix” on page 193

O

AUTO REC

Move the cursor to the AUTO REC button, then press [ENTER] to place the DM1000 
in Automix record ready mode. The button becomes highlighted. In this state, when the 
DM1000 receives the appropriate timecode, it automatically starts Automix recording. 
Record ready mode is not canceled, even if Automix recording is stopped, unless you 
move the cursor to this button and press [ENTER].

P

REC

Move the cursor to the REC button, then press [ENTER] to place the DM1000 in Auto-
mix record ready mode. The button starts to flash. In this state, when the DM1000 
receives the appropriate timecode, it automatically starts Automix recording.

Unlike the AUTO REC button, however, record ready mode is canceled when recording 
is stopped.

If you move the cursor to this button and press [ENTER] during Automix playback, the 
DM1000 engages record ready mode.

Q

PLAY

If the timecode source is set to internal, move the cursor to the PLAY button and press 
[ENTER]. Automix recording or playback starts.

If you selected an external timecode source, as soon as the DM1000 receives the external 
timecode, recording or playback starts, and this button turns on automatically. After you 
stop Automix by pressing the STOP button or ABORT button, you can restart recording 
or playback by pressing this button as long as the DM1000 is still receiving timecode.

Tip:  

• The Undo buffer is cleared when you turn off the power to the DM1000. If you want to 

save the contents of the Undo buffer, perform the undo operation, then store the Automix.

• However, you cannot undo the operations performed on the Event Edit page.

Summary of Contents for 006IPTO-F0





































































































































































































































































































































































































Reviews:

No comments

Related manuals for 006IPTO-F0

Yamaha MG124CX Owner'S Manual preview
MG124CX
Brand: Yamaha Pages: 24
T-Rex Tremster User Manual preview
Tremster
Brand: T-Rex Pages: 5
InoTec 10039462 Original Operating Manual preview
10039462
Brand: InoTec Pages: 19
Princess 222021 Instructions For Use Manual preview
222021
Brand: Princess Pages: 32
Zoom 506II Bass Operation Manual preview
506II Bass
Brand: Zoom Pages: 17
Maestro COMET CHORUS User Manual preview
COMET CHORUS
Brand: Maestro Pages: 38
Adler Europe AD 4205 User Manual preview
AD 4205
Brand: Adler Europe Pages: 52
MCF M 18 User Manual preview
M 18
Brand: MCF Pages: 53
SEVERIN HANDMIXER-SET HM 3814 Dimensions preview
HANDMIXER-SET HM 3814
Brand: SEVERIN Pages: 1
Panasonic WU-SX06 User Manual preview
WU-SX06
Brand: Panasonic Pages: 2
Panasonic WJ-DA464 User Manual preview
WJ-DA464
Brand: Panasonic Pages: 7
Panasonic Ramsa WR-S4412 Operating Instructions Manual preview
Ramsa WR-S4412
Brand: Panasonic Pages: 20
Panasonic Ramsa WR-M10A Operating Instructions Manual preview
Ramsa WR-M10A
Brand: Panasonic Pages: 20
Panasonic WJMX1200A - POSTBOX Installation Manual preview
WJMX1200A - POSTBOX
Brand: Panasonic Pages: 28
Panasonic RAMSA WR-S208 Operating Instructions Manual preview
RAMSA WR-S208
Brand: Panasonic Pages: 28
Panasonic WR-XS3 Operating Instructions Manual preview
WR-XS3
Brand: Panasonic Pages: 39
Panasonic WJMX50A - DIGITAL MIXER Operating Instructions Manual preview
WJMX50A - DIGITAL MIXER
Brand: Panasonic Pages: 43
Panasonic Ramsa WR-DA7 mkII Service Manual preview
Ramsa WR-DA7 mkII
Brand: Panasonic Pages: 86

Brands by name

Popular brands

Load more brands