background image

74

Recording/Playback/Remote Control

01X   Owner’s Manual (Supplementary Manual)

Before Using

Basics Section

Appendix

Getting Started

Reference

Using the transport controls

These buttons let you control Cubase SX 3 in the same 

way as using a tape recorder.

No matter what window is active, you can use these to con-

trol song playback/recording and navigate through the 

song.  Also keep in mind that all of your computer shortcut 

keys are active if you want to use them— even while using 

the 01X as a remote control.

Using markers

Hold down [MARKER] and use the [

r

] (rewind)/[

f

(fast-forward) buttons.  If you’ve set up markers in the 

song, these can be used to jump among the marker points.  

Keep in mind that markers are not selected here in numeri-

cal order, but rather in the sequential order they appear in 

the song.  This lets you easily step through the markers as 

they appear in the song’s time line.

Programming markers

If you haven’t set up a marker or want to program a new 

one, you can do this from the 01X, too.  Move to the 

desired song position, then press the [WRITE] button.  A 

new marker is set for the current postion.

Cycle playback

In Cubase SX 3, you can loop playback between the left 

and right locators.  To turn this on/off, press the [LOOP] 

button.  The [LOOP] lamp lights to indicate Loop is active.

Selecting and arming tracks

There are two ways (below) to select a track remotely.  

Notice that selecting a track also automatically arms 

(enables) it for recording.

• Use the [

/

] (Up/Down) cursor buttons.

Press these to select the previous or next track in the 

Project window.  (Note that the track is highlighted in 

Cubase SX 3, and the corresponding channel [SEL] but-

ton on the 01X lights.)  These buttons serve the same 

function as the up/down keys on your computer key-

board.

• Press the [SEL] button of the appropriate track.

Use the BANK [

<

/

>

] (Left/Right) buttons if necessary 

to select the desired ‘bank’ of eight tracks, then press the 

appropriate [SEL] button.

Rewind

Fast-forward

Stop

Play

Record

Dial
This is like a jog/shuttle wheel on 
a video deck, and gives you an 
even faster way to move the song 
position in the window.

 Previous marker

 Next marker

Summary of Contents for 01x





















Reviews: