80
Recording/Playback/Remote Control
01X Owner’s Manual (Supplementary Manual)
Before Using
Basics Section
Appendix
Getting Started
Reference
Editing Effect settings
The 01X can also be used to edit the plug-in effects in
Cubase SX 3.
Using the 01X to control the effects in Cubase SX 3 is
essentially a three-stage operation: 1) creating an FX
Channel track, 2) adjusting the send levels, and 3) chang-
ing the effect settings.
1) Creating an FX Channel track
The first step in setting up the plug-in effects is to create an
FX Channel track. Multiple effects can be assigned to this
independent channel, which can be then used as a send
destination for the audio tracks. The send level to the
effect(s) is controlled independently from each track. (For
further details and instructions on using the plug-in effects
within Cubase SX 3, refer to the Cubase SX 3 Getting
Started book and other documentation included with the
software.)
q
From the Project menu, select “Add Track,” then select
“FX Channel.”
Alternately, you can right-click in the empty grey area
at the bottom of the Track list and select “Add FX
Channel Track” from the pull-down menu.
w
Click on the Configuration box and set this to “Stereo.”
e
Click on the Plugin box, and select the desired effect
from the pull-down menu.
r
Click “OK.”
The FX Channel track is automatically selected and
enabled, and the control panel for the selected effect is
automatically called up.
