68
Recording/Playback/Remote Control
01X Owner’s Manual (Supplementary Manual)
Before Using
Basics Section
Appendix
Getting Started
Reference
r
At the prompt that appears, click “Switch” to activate
the new setting.
t
When finished, click “Apply” to enter the changes, then
click “OK.”
MIDI setup
q
From the Devices menu, select “Device Setup...”
w
Select “Default MIDI Ports” from the list.
e
Set the MIDI Input and Output ports.
Click on the arrow to call up the pull-down menu for
each setting, Input and Output. If you intend to use the
01X as a MIDI interface (with the MIDI A and B termi-
nals on the rear panel), set these to mLAN MIDI Port 2
or 3.
r
Click “Apply” to enter the changes.
t
Select “All MIDI Inputs” from the list at left.
y
In the list at right, disable mLAN MIDI In Ports 1 and
4 - 8, by clicking on “Yes” in the appropriate Active
column box and changing it to “No” (as shown).
• For Mac OS X, disable ports 1, 4, and 5.
Port 1 is the unnumbered selection. Ports 2 and 3
should remain active (“Yes”). Make sure the settings
correspond to the example above.
