70
Recording/Playback/Remote Control
01X Owner’s Manual (Supplementary Manual)
Before Using
Basics Section
Appendix
Getting Started
Reference
In this example, we’ve selected “8 mono in.” The new
bus configuration should look like this:
r
When finished, click the Close (“X”) box at the top
right.
• When the 01X is set to 96kHz/88.2kHz operation, mLAN output
(from 01X to the computer) is limited to 16 channels. In this
case, the maximum number of input channels that can be acti-
vated is 16.
• Outputs
q
From the Devices menu, select “VST Connections.”
w
Click on the Outputs tab.
e
Select the desired Output preset.
As with Inputs above, there are a variety of common
configurations available from this preset menu. If you
don’t see anything here that fits your particular applica-
tion, you can easily create your own output setup by
using the “Add Bus” button.
In this example, we’ve selected “Stereo out.” The new
bus configuration should look like this:
r
When finished, click the Close (“X”) box at the top
right.
• When you are using WDM and ASIO simultaneously, refer to
“Setting in the mLAN Auto Connector” in the separate Installation
Guide.
