26
Mixing and Monitoring
02R User’s Guide
Analog Inputs
The 02R is equipped with 24 analog input connectors. The first sixteen
channels, 1 through 16, are mono input channels designed for microphone
to line level signal inputs. The last eight channels, 17 through 24, are stereo
channels designed for line level signals only.
In addition, the first eight channels not only have selectable input
connectors, XLR-type or phone, but they also have an insert connector,
allowing you to patch external signal processors before the input signal is
converted to digital.
For monitoring the output of a stereo tape recorder or another similar
analog device, the 02R also has two pairs of 2TR IN phone connectors.
Phantom Power
Phantom power provides a +48 V DC power source for condenser type
microphones. It is applied to the XLR-type connectors (INPUT A) for input
channels 1 through 8. The phantom power switch for each channel is used
to turn it ON and OFF. Phantom power is applied to each individual input.
Phantom power can only be applied to the XLR-type connectors
(INPUT A) for input channels 1 through 8. Select those connectors with the
A/B switch: up for A, down for B.
With phantom power set to ON, non-phantom powered microphones,
dynamic microphones, and balanced line-level sources can still be
connected to INPUT A connectors for input channels 1 through 8.
However, be careful with unbalanced sources.
INPUT A
INPUT A
INPUT A
INPUT A
INPUT A
INPUT A
INPUT A
INPUT A
INPUT
B
INSERT
I/O
INPUT
B
INSERT
I/O
INPUT
B
INSERT
I/O
INPUT
B
INSERT
I/O
INPUT
B
INSERT
I/O
INPUT
B
INSERT
I/O
INPUT
B
INSERT
I/O
INPUT
B
INSERT
I/O
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
23
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
0dB
0dB
0dB
0dB
0dB
0dB
0dB
0dB
+48V
ON
OFF
A
B
