Mixing and Automix
71
02R Getting Started Guide
If you want to keep the contents of the current automix, store them into an
available memory location before proceeding.
1.
Use the [AUTOMIX] button to locate the AUTOMIX 2/7 page.
2.
Use the SCENE MEMORY increment or decrement buttons to
select your starting scene memory and press the [RECALL]
button.
The selected scene memory is recalled.
Your mixdown scene memory should be stored with the [FLIP] button
pressed so that the faders operate the tape returns rather than the input
channels.
3.
Set your starting levels for the mixdown and press the [STORE]
button to update the scene memory.
The 02R will display a popup confirmation request message. Select the
“EXECUTE” icon and press the [ENTER] button.
4.
Use the CURSOR buttons to select the “NEW” icon and press the
[ENTER] button.
The 02R will display a popup confirmation request message asking if you
want to make a new automix. The popup has two icons: “CANCEL” and
“EXECUTE”:
Note:
You can customize your 02R so that the [FLIP] button status is ignored
during scene memory recalls. In this case, you may need to press the [FLIP] button
before you start recording your automix. See “Preferences” on page 198 of the
User’s Guide for more information.
AUTOMIX
STORE
RECALL
SCENE MEMORY
