4. AUX SOLO
To solo an AUX MASTER while still viewing an INPUT FADER LAYER,
press the required AUX SELECT switch once to select it, and once
again to SOLO it. Pressing a third time will cancel the SOLO. While
the AUX is in SOLO, its SELECT switch will flash.
NOTE ___________________________________________________
This function can be disabled in the SOLO page of the MONITOR
menu, with the AUX/SOLO LINK option.
5. Copy STEREO Mix to an AUX
Press and hold an INPUT FADER LAYER switch, then press an AUX
SELECT switch, and click YES in the confirmation box on the LCD.
This copies the fader levels to the selected AUX sends. Make sure the
Aux sends are all PRE by clicking the GLOBAL PRE switch on the
SEND1-24 page in the AUX DISPLAY menu.
NOTE ___________________________________________________
Repeat the same procedure for each fader layer to copy the whole mix
to the Aux sends, as only one layer is copied at a time.
TIP _____________________________________________________
This is useful for making a quick headphone mix in a recording session
(where AUX 7 and 8 can be sent directly to the STUDIO MONITOR
OUT), or making a quick stage-monitor mix for a guest musician at a
live performance.
6. SCENE FADE TIME Copy
To assign the same fade time to all channels, first enter the required
FADE TIME for one channel, then double-click ENTER to copy the time
to all the other input or output channels.
Other Tips
1. TOUCH SENSE FADER enable / disable
Touch Sense faders can be either very useful or very annoying,
depending on the engineer’s working style and the application. To
change the Fader Touch Sense settings, access the PREFER2 display
in the SETUP menu.
2. FADER / MUTE GROUP ASSIGN
The default settings of USER DEFINED KEY bank F is for INPUT
GROUP ASSIGN functions. Keys 1-8 are for Input FADER GROUPS,
and Keys 9-16 are for Input MUTE GROUPS. To assign a channel to a
group, select the channel and press the relevant USER DEFINED KEY
in BANK F. The USER DEFINED KEY will then light up to confirm the
assignment.
NOTE ___________________________________________________
A Channel cannot be in more than one FADER GROUP at a time, and
cannot be in more than one MUTE GROUP at a time.
21
02R96-v2 Quick Start Guide
