78
Chapter 7—Input Channels
02R96 Version 2—Owner’s Manual
Grouping Input Channel Mutes (ON/OFF)
Input Channel Mutes can be grouped, allowing you to mute several Input Channels simul-
taneously. There are eight Input Channel Mute groups: I, J, K, L, M, N, O, and P.
1
Use the DISPLAY ACCESS [GROUP] button to locate the Input Channel Mute
Group pages.
The Mute group parameters for the 56 Input Channels are divided between two pages. The
Input Channel 1–48 Mute Group page is shown below. The layout of the other page is the
same.
2
Use the LAYER buttons to select the Layers.
The corresponding Mute Group page and group row is selected as each Layer is selected.
3
Use the Up/Down cursor buttons to select Mute groups I–P.
The selected group is highlighted by a flashing cursor box.
4
Use the [SEL] buttons to add and remove mutes to and from the selected
group.
When an Input Channel is added to a Mute group, its [SEL] button indicator lights up.
ENABLE:
These buttons are used to enable and disable the groups.
INPUT MUTE MASTER:
When this check box is checked, clicking a MASTER MUTE
button mutes or unmutes all channels in the corresponding Mute group. When this check
box is unchecked, the Input Channel [ON] button status links to the mute on/off status of
the channels in the group.
MASTER MUTE:
When the Input Mute Master check box is checked, use this button to
mute or unmute all channels in the corresponding Mute group.
When the Input Mute Master check box is unchecked, pressing the Input Channel [ON]
button mutes or unmutes the channels in the corresponding Mute group (Mute On chan-
nels turn off and Mute Off channels turn on).
