manualshive.com logo in svg

Yamaha 02R96 Version 2, Owner'S Manual

The Yamaha 02R96 Version 2 Owner's Manual is a comprehensive guide to unlock the full potential of this professional-grade audio mixing console. With its intuitive design and advanced features, this manual is a must-have tool for any audio enthusiast. Download your free copy from 88.208.23.73:8080 today!

Share
Download
background image

Rear Panel

41

02R96 Version 2—Owner’s Manual

H

2TR IN DIGITAL COAXIAL 2 & 3

These phono connectors accept consumer format (IEC-60958) digital audio, and are typi-
cally used to connect the digital stereo outputs of 2-track recorders. Signals connected here 
can be monitored via the CONTROL ROOM MONITOR OUT by pressing the CONTROL 
ROOM [2TR D2] or [2TR D3] button. In addition, these inputs can be patched to Input 
Channels or Insert Ins. Unsynchronized digital audio signals can be converted by the inter-
nal sampling rate converters. See “2TR Digital Ins” on page 58 for more information.

I

2TR IN DIGITAL AES/EBU 1

This XLR-3-31-type connector accepts AES/EBU format digital audio, and is typically used 
to connect the digital stereo output of a 2-track recorder. Signals connected here can be 
monitored via the CONTROL ROOM MONITOR OUT by pressing the CONTROL 
ROOM [2TR D1] button. In addition, this input can be patched to Input Channels or 
Insert Ins. Unsynchronized digital audio signals can be converted by the internal sampling 
rate converters. See “2TR Digital Ins” on page 58 for more information.

J

WORD CLOCK OUT connector

This BNC connector outputs a wordclock signal at the same clock rate as the 02R96. See 
“Wordclock Connections” on page 55 for more information.

K

WORD CLOCK 75

Ω

 ON/OFF termination switch

This switch applies 75

Ω

 termination to the WORD CLOCK IN. See “Terminating External 

Wordclocks” on page 57 for more information.

L

WORD CLOCK IN connector

This BNC connector is for connecting an external wordclock signal. See “Selecting the 
Wordclock Source” on page 56 for more information.

M

CONTROL port

This 25-pin D-sub connector provides access to the GPI (General Purpose Interface) 
through which external equipment can be triggered when specified 02R96 faders or USER 
DEFINE KEYS are operated. It can also be used to control a “RECORDING” light outside 
of a studio, to trigger the Solo function of an 02R Digital Recording Console, or to turn on 
Talkback from an external device. See “GPI (General Purpose Interface)” on page 225 for 
more information.

N

METER port

This 15-pin D-sub connector is for connecting the optional MB02R96 Peak Meter Bridge.

O

MIDI IN, OUT & THRU ports

These standard MIDI IN, OUT, and THRU ports are used to connect the 02R96 to other 
MIDI equipment. Supported MIDI messages include Program Changes for Scene recall, 
Control Changes and Parameter Changes for real-time parameter control, Bulk Dump for 
data storage, MIDI Clock, MTC, and MMC. See “MIDI I/O” on page 190 for more infor-
mation.

P

CASCADE IN & OUT ports

These 64-pin connectors can be used to cascade up to four 02R96s to create a multiple-unit 
mixing system. The 02R96 can also be cascaded with an 02R Digital Recording Console. See 
“Cascading Consoles” on page 63 for more information.

Summary of Contents for 02R96 Version 2






























































































































































































































































































































































Reviews:

No comments

Related manuals for 02R96 Version 2

Davis Instruments Energy EnviroMonitor User Manual preview
Energy EnviroMonitor
Brand: Davis Instruments Pages: 63
DAVIS Vantage Pro2 Plus User Manual preview
Vantage Pro2 Plus
Brand: DAVIS Pages: 60
Carat 50 SUPER Operating Instructions Manual preview
50 SUPER
Brand: Carat Pages: 44
Farberware SM3481RBR Manual preview
SM3481RBR
Brand: Farberware Pages: 29
American Audio Q-221 Instruction Manual preview
Q-221
Brand: American Audio Pages: 14
Omcan MM-CN-0020 Instruction Manual preview
MM-CN-0020
Brand: Omcan Pages: 16
Levitronix PuraLev LCO-i100 User Manual preview
PuraLev LCO-i100
Brand: Levitronix Pages: 19
Stageline MPX-500 Instruction Manual preview
MPX-500
Brand: Stageline Pages: 18
Heinner HPM-1500XMC Instruction Manual preview
HPM-1500XMC
Brand: Heinner Pages: 45
Heinner HM-250WHSL Instruction Manual preview
HM-250WHSL
Brand: Heinner Pages: 36
Sencor SBL 5370WH User Manual preview
SBL 5370WH
Brand: Sencor Pages: 10
Peloton PLTN-RB1VO User Manual preview
PLTN-RB1VO
Brand: Peloton Pages: 14
Kushlan 350 Series Operating Instructions Manual preview
350 Series
Brand: Kushlan Pages: 14
Ginnys SSKM-001 Instruction Manual preview
SSKM-001
Brand: Ginnys Pages: 11
YORKVILLE AP 312 Service Manual preview
AP 312
Brand: YORKVILLE Pages: 14
Brentwood SM-1152 Operating And Safety Instructions Manual preview
SM-1152
Brand: Brentwood Pages: 18
Sulzer ABS XRW 750 Installation And Operating Instructions Manual preview
ABS XRW 750
Brand: Sulzer Pages: 44
JAKKS Pacific EZ Pro Instruction Manual preview
EZ Pro
Brand: JAKKS Pacific Pages: 4

Brands by name

Popular brands

Load more brands