120
Feature Reference — Utility Mode
"
Press the START/STOP button and the LCD
will display “Sure? y/n.”
MISC.
SNARE
KICK
CYMBAL
Dump Out
Sure?y/n
#
Press the +1/YES button to send bulk data.
The LCD will display “complete” for a
moment when the operation is completed
and the display will return to the original
Dump Out display page.
Press the -1/NO button to cancel the bulk
data operation.
MISC.
SNARE
KICK
CYMBAL
Dump Out
complete
Receiving Bulk Data
You can send DTX data stored in an external device
back to the DTX by using bulk data reception.
!
When the pattern or song is not playing, send
bulk data from an external device.
"
When the DTX starts to receive bulk data, the
following screen will appear on the LCD.
MISC.
SNARE
KICK
CYMBAL
Bulk in
Complete
#
When the DTX has completed receiving all the
data, the following screen will appear on the
LCD.
MISC.
SNARE
KICK
CYMBAL
Bulk in
Complete
$
To return to the original display (before
receiving bulk data), press any button or key.
It is necessary to set the DTX to receive exclusive
messages (P.117). It is also necessary to match the
device number of the external device to the device
number of the DTX (P.117).
23 P/C
➔
KIT (program change table)
This determines the program change number
that will be used to change the drum kit
number from an external MIDI device or with in
the DTX.
!
Move the cursor to the program change
number using the
Q
cursor buttons
and set the program change number by
rotating the Data Scroll Wheel or using the
+1/YES and -1/NO buttons.
"
Move the cursor to the drum kit number and
select the drum kit number by rotating the
Data Scroll Wheel or using the +1/YES and
-1/NO buttons.
#
Repeat steps
!
and
"
and assign each
program change number to the drum kits.
MISC.
SNARE
KICK
CYMBAL
P/C->KIT
1-> 16
Program change
number
Drum kit number
Settings:
Program change number:
1 to 128
Drum kit number:
off, 1 to 64
24 EQ (equalizer)
The EQ sub-mode controls the internal
equalizer settings. Select between this page and
the 28th page using the PAGE
¡
or PAGE
⁄
buttons. Adjust the quality of the entire sound
output from the DTX using the equalizer page
featuring parametric type settings of 3 frequency
ranges: LOW, MID, and HIGH.
A
Move from this page to other sub-modes by rotating the
Data Scroll Wheel or using the +1/YES and -1/NO buttons.
MISC.
SNARE
KICK
CYMBAL
UTILITY
[ EQ ]
Summary of Contents for 2.0
Page 4: ......
Page 32: ...28 Getting Started ...
Page 174: ...D T M T YAMAHA DRUM TRIGGER MODULE DTX VERSION2 0 OWNER S MANUAL ...