manualshive.com logo in svg

Yamaha 2.0, Owner'S Manual

The Yamaha 2.0 Owner's Manual is a comprehensive guide that provides you with all the necessary information to maximize your experience with this exceptional product. Discover its features, functions, and troubleshooting tips within this downloadable manual – available for free at 88.208.23.73:8080.

Share
Download
background image

ADVARSEL!

Lithiumbatteri—Eksplosionsfare ved fejiatig håndtering.
Udskiftning må kun ske med batteri af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandoren.

VARNING

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp
eller en ekvivalent typ som rekommenderas av
apparattillverkaren. Kassera använt batteri enligt fabrikantens
instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti asennttu. Vaihda
paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin.
Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.

FCC  INFORMATION  (U.S.A)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this  manual, meets FCC requirements. Modifications not expressly
approved by Yamaha may void your authority, granted by the FCC, to use the product.

2. IMPORTANT:

 When connecting this product to accessories and/or another product use only high quality shielded cables.

Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.

3. NOTE:

 This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices.

Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not
result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the user's manual, may cause interference harmful to the operation of other electronic devices. Compliance
with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference,
which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures :

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna.

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results, please contact the your local retailer authorized to distribute this type of product.
If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe
Ave, Buena Park, CA 90620

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

Caution

Always use the supplied Yamaha AC Adaptor to power DTX. The
use of an incompatible adaptor may pose a serious shock hazard.

Summary of Contents for 2.0















































































































































































Reviews:

No comments

Related manuals for 2.0

Roland V-Drums TD-8 Owner'S Manual preview
V-Drums TD-8
Brand: Roland Pages: 224
HXM HD-006 User Manual preview
HD-006
Brand: HXM Pages: 22
Gear4music DD400X Setup Manual preview
DD400X
Brand: Gear4music Pages: 6
Sigma AMSTRAD User Manual preview
AMSTRAD
Brand: Sigma Pages: 268
SnapPad EQ Compact Installation Instructions preview
EQ Compact
Brand: SnapPad Pages: 5
MFB TT/CO/CL-522 Owner'S Manual preview
TT/CO/CL-522
Brand: MFB Pages: 2
MFB MFB-501 Pro Operating Manual preview
MFB-501 Pro
Brand: MFB Pages: 11

Brands by name

Popular brands

Load more brands