Setting Up
11
EZ-AG
■
Using Headphones• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
For private practicing and playing without dis-
turbing others, connect a set of stereo head-
phones to the PHONES/OUTPUT jack. Sound
from the built-in speaker system is automati-
cally cut off when you insert a headphone plug
into this jack.
■
Connecting To an External Amplifier or Stereo System • • • • •
Though the EZ-AG is equipped with a built-in
speaker system, you can also play it through an
external amplifier/speaker system. First, make
sure the EZ-AG and any external devices are
turned off, then connect one end of a stereo
audio cable to the LINE IN or AUX IN jack(s)
of the other device and the other end to the
PHONES/OUTPUT jack on the EZ-AG.
■
Using the MIDI Terminals • • • • • • • • • • • • • • • • • • • • • • • • • • •
The EZ-AG also features MIDI terminals,
allowing you to interface the EZ-AG with other
MIDI instruments and devices.
• Make sure that power to all external devices is OFF when connecting the EZ-AG
to avoid possible electric shock and damage to the equipment. Also, start with all
volume controls on external devices turned down to minimum to prevent possi-
ble damage to speakers and other playback equipment.
Connections
MIDI OUT Connector
MIDI IN Connector
USB-MIDI Interface
USB
Connector
Computer
Headphones
Powered Speaker
Audio System,
Television, etc.
RCA Pin Plugs
PHONES/OUTPUT
Connector
Standard
Phone Plug
Stereo
Phone Plug
EZ-AG
DC IN 12V
Connector
AC Power Adaptor
To AC wall socket
Refer to “Connecting To a
Computer” on page 21
for connection details.
Stereo System
MIDI
instrument
9
