Connecting To MIDI Devices
23
EZ-AG
Local Control determines whether the EZ-AG plays its own internal tone generator (Local Control = ON), or
whether performance data is transmitted via the MIDI OUT connector only, without playing the internal tone
generator (Local Control = OFF).
●
Local Control ON
This is the normal setting. In this state the EZ-AG’s internal tone generator
will play whatever is played on the strings and frets, as well as any MIDI
data received via the MIDI IN connector.
●
Local Control OFF
In this state the internal tone generator will not sound in response to playing
the strings and frets, but the performance data will be transmitted via the
MIDI OUT connector. The internal tone generator will play any MIDI data
received via the MIDI IN connector.
1
Simultaneously press the [CAPO] and [TUNING] buttons.
2
Set local control as required.
Use the [+] and [-] buttons to turn local control on or off as required. [+]
turns local control on, while [-] turns it off.
Normally EZ-AG song playback is synchronized to its own internal clock. Use this function when you want to
synchronize EZ-AG playback to a MIDI clock signal from an external device.
●
Internal Clock (Int)
This is the normal setting: EZ-AG song playback is synchronized to its own
internal clock.
●
External Clock (Etr)
The EZ-AG will be synchronized to a MIDI clock signal from a connected
external device. Song and demo playback will not start if an appropriate
external clock signal is not being received.
1
Simultaneously press the [TEMPO] and [VOLUME] buttons.
2
Set the clock as required.
Use the [+] and [-] buttons to set the clock mode as required. [+] selects
“Int”, while [-] selects “Etr”.
Turning Local Control On or Off
• Local control is always ON when
the EZ-AG power is initially
turned on.
Setting the MIDI Clock
• The clock is always set to “Int”
when the EZ-AG power is initially
turned on.
21
