Folder/File Operations using the Open/Save Display
Basic Operations—Organizing Your Data
76
Tyros2 Owner’s Manual
Naming Folders/Files
Folders and files on the installed drives can be freely renamed. You can also name files you’ve created.
The instructions below apply when calling up the Name operation from the Open/Save display. For other cases, go directly to step
#5 below.
1
Call up the page (path) of the Open/Save display, where the relevant folders/files are
located.
2
Press the [NAME] LCD button (lower [1] button) at the bottom the LCD display.
The pop-up window for the Name operation appears at the bottom of the display. To return to the
original display, press the [CANCEL] LCD button.
3
Select the desired folder or file to be named.
4
Press the [OK] LCD button (lower [7] button).
The pop-up window for entering the name appears at the bottom of the display. To return to the orig-
inal display, press the [CANCEL] LCD button.
5
Input the name of the selected folder or file.
6
Press the [OK] LCD button (upper [8] button) to actually enter the
new name for the item and return to the original display.
Change the type of character by using the upper [1] button.
• CASE ........... capital letters, numbers, marks
• case ............. lowercase letters, numbers, marks
Move the cursor to the desired position by using
the [DATA ENTRY] dial.
Press the [OK] LCD button (upper [8] button) to
actually enter the new name and return to the
original display.
Press the appropriate button,
corresponding to the character
you wish to enter.
Several different characters are
assigned to each button, and
the characters change each
time you press the button.
To actually enter the selected
character, move the cursor or
press another letter-input but-
ton. Alternately, you can wait for
a short time and the characters
will be entered automatically.
Select the desired upper row menu by using
the upper LCD [1]–[8] buttons.
Deletes the character at the cursor.
Press the [CANCEL] LCD button (lower [8] but-
ton) to delete all of the characters on the line at
once and return to the original display.
Call up the mark (symbol) list by pressing the lower [6] button.
Call up the ICON SELECT display by pressing the lower [1] button.
This lets you change the icon at the left of the file name.
Select the desired lower row menu by using the
lower LCD [1]–[8] buttons.
• The maximum number of characters that can
be used in naming is 41.
• To enter numbers without pressing the button
repeatedly, press and hold down the appropri-
ate button for a while.
NOTE
Summary of Contents for 2
Page 1: ...Owner s Manual EN ...
Page 236: ...Tyros2 Owner s Manual ...