3 - 25
CHK
ADJ
CHECKING THE V-BELT/
CLEANING THE SPARK ARRESTER
5. Remove:
• drive belt cover
Refer to “PRIMARY AND SECONDARY
SHEAVES” in chapter 4.
• console
• passenger seat
• driver seat
Refer to “SEATS, ENCLOSURE, HOOD
AND CARGO BED” in chapter 8.
CLEANING THE SPARK ARRESTER
1. Clean:
• spark arrester
▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
WARNING
• Select a well-ventilated area free of com-
bustible materials.
• Always let the exhaust system cool
before performing this operation.
• Do not start the engine when removing
the tailpipe from the muffler.
a. Remove the bolts
1
.
b. Remove the tailpipe
2
by pulling it out of
the muffler.
c. Tap the tailpipe lightly with a soft-face ham-
mer or suitable tool, then use a wire brush
to remove any carbon deposits from the
spark arrester portion of the tailpipe and the
inner contact surfaces of the muffler.
d. Insert the tailpipe
2
into the muffler and
align the bolt holes.
e. Insert the bolt
1
and tighten it.
f. Start the engine and rev it up approximately
twenty times while momentarily creating
exhaust system back pressure by blocking
the end of the muffler with a shop towel.
g. Stop the engine and allow the exhaust pipe
to cool.
▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
Summary of Contents for 2004 Rhino 660 YXR660FAS
