FRONT FORK
CHAS (3^3^)
NOTE:
8 While filling the front fork leg, keep it up-
right.
8 After filling, slowly pump the front fork leg
up and down to distribute the fork oil.
7. Install:
8fork spring
1
NOTE:
8 Install the spring with the smaller pitch fac-
ing down .
EAS00663
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
•
front fork leg
•
o-ring
New
•
cap bolt
NOTE:
Pull up the inner tube until it stops, then install
the cap bolt .
2. Tighten:
•
cap bolt
(T)
X |
45 Nm (4.5 m
*
kg, 32.5 ft
*
lb)
•
lower bracket pinch bolt
(2)
X |
30Nm(3.0m
*
kg, 21.7ft
*
lb)
4-26
Downloaded
from
www.ScooterTime.net
