STEERING HEAD
CHAS (3^3^)
EAS00682
CHECKING THE STEERING HEAD
1. Wash:
8bearing balls
8bearing races
Recommended cleaning solvent
Kerosene
2. Check:
8bearing balls
(T)
8bearing races
(2)
Damage/pitting
-»
Replace.
3. Replace:
8bearing balls
8bearing races
• • • • • • • • • • • • • • • • • • • • • • •
a. Remove the bearing races from the steer-
ing head pipe with a long rod
1
and ham-
mer.
b. Remove the bearing race from the front fork
assembly with a floor chisel
2
and ham-
mer.
c. Install a new bearing races.
c
C
If the bearing race is not installed properly,
the steering head pipe could be damaged.
NOTE:
Always replace the balls and bearing races as
a set.
• • • • • • • • • • • • • • • • • • • • • • •
4. Check:
8lower bracket
(along with the steering stem)
Bends/cracks/damage
-»
Replace.
4-35
Downloaded
from
www.ScooterTime.net
