ELECTRIC STARTING SYSTEM
ELEC
EAS00758
w
8 A wire that is used as a jumper lead must
have at least the same capacity or more
as that of the battery lead, otherwise
the jumper lead may burn.
8 This check is likely to produce sparks,
therefore make sure nothing flammable
is in the vicinity.
•
Does the starter motor turn?
0
YES
I
NO
Repair or replace the
starter motor.
EAS00759
4. Starting circuit cut-off relay
•
Remove the starting circuit cut-off relay.
•
Connect the pocket tester (
Q x
1) and bat-
tery (12 V) to the starting circuit cut-off relay
coupler as shown.
Positive battery terminal
-»
red/white
®
Negative battery terminal
->
light green
Positive tester probe
-»
green/yellow
®
Negative tester probe
->
green/yellow
®
1
2
3
4
•
Does the starting circuit cut-off relay have
continuity between green/yellow and green/
yellow?
&
YES
l
NO
Replace the starting cir-
cuit cut-off relay
8-17
+1 I
Downloaded
from
www.ScooterTime.net